Multiple ICS-17A and ICS-30A belt weighers have been installed and commissioned

Electronic belt weighers are dynamic weighing instruments closely related to the belt conveyors on which they are installed, the actual operating conditions, and the application environment.

To adapt to various application conditions, manufacturers have developed multiple types, each achieving different levels of accuracy and meeting different application requirements.

Although some non-high-precision belt weighers have seen a decline in their application scope, they still find use in many non-high-precision, low-value material scenarios.

Recently, Guonuo Technology has completed the installation and commissioning of multiple ICS-17A and ICS-30A belt weighers, each tailored to different industries, application environments, and user-specific needs. Despite both being electronic belt weighers, the ICS-17A and ICS-30A models differ significantly in structure, each fulfilling distinct application demands. Guonuo Technology assesses the user's actual situation to provide the most suitable solution.

ICS-17A Belt Weigher Project Introduction

The ICS-17A belt weigher is primarily used in coal mines and thermal power plants, mainly for coal production monitoring and thermal power plant coal intake measurement. Consequently, it requires high accuracy, ideally reaching 0.5% but not exceeding 1%. Given the long and relatively flat conveyors (with an inclination angle of up to 17°) in these applications, the ICS-17A belt weigher is well-suited.

Considering the user's accuracy, stability requirements, and budget, the ICS-17A belt weigher, featuring dual levers, four groups of idlers, and two high-precision load cells, offers a long weighing zone and robust support, meeting the user's accuracy requirements.

While there are belt weigher structures capable of achieving even higher accuracy, such as the ICS-14A and matrix-type belt weighers, Guonuo Technology prioritizes the user's budget.

The ICS-17A belt weigher, as a classic design, offers a lower price compared to high-precision series belt weighers when equipped with the same load cells, speed sensors, and instrumentation.

Therefore, Guonuo Technology opts for the ICS-17A belt weigher, configured with high-performance sensors and instrumentation, to provide a more cost-effective solution within the user's budget.

In summary, Guonuo Technology does not blindly recommend higher-priced high-precision belt weighers but instead formulates a more reasonable plan based on the user's actual needs, enabling users to obtain more suitable products at a lower cost.

ICS-30A Belt Weigher Project Introduction

The ICS-30A belt weigher, as a single-idler, fully suspended structure, features a relatively short weighing zone and moderate measurement accuracy, ideally reaching 1.0%.

Despite its limited accuracy, the ICS-30A belt weigher remains advantageous in certain applications, as demonstrated by recent projects undertaken by Guonuo Technology. In a case where the user transports waste materials of low value, with limited installation space and a conveyor inclination angle of over ten degrees, the user's accuracy requirements are not particularly high, merely requiring a general understanding of material weight.

The ICS-30A belt weigher excels in adaptability and simplicity, with minimal installation requirements, making it suitable for economically oriented and easily installable project sites.

Although matrix-type belt weighers could meet the user's needs and even offer higher accuracy, they would be somewhat excessive given the user's budget and requirements, which is why Guonuo Technology recommends the ICS-30A belt weigher.

In conclusion, both the ICS-17A and ICS-30A belt weighers, despite their differing structural characteristics, are tailored by Guonuo Technology based on environmental conditions, application scenarios, installation operations, user requirements, and budgets. Although their application scopes differ, they both fulfill the diverse needs of different users.