Two belt-type quantitative weighing feeders of Guonuo Technology have been installed and debugged in the environmental protection industry

With the socio-economic and industrial development, environmental protection is receiving increasing attention. To comprehensively deepen the development of environmental protection, it is necessary to apply advanced automation and information equipment in the environmental protection industry, promote innovation in environmental protection machinery application technology, and make positive contributions to the development of environmental protection. An important part of the environmental protection industry is water treatment, which requires the use of water treatment agents for purification. The quality of water treatment agents affects the effectiveness of water treatment. Therefore, it is essential to ensure the accuracy of ingredient measurement and feeding control during the production of water treatment agents.

Recently, Guonuo Technology completed a belt-type quantitative weighing feeder project for a water treatment agent research and production manufacturer. The weighing control accuracy met the customer's requirements, providing a series of production ingredient and management functions, which were highly recognized and praised by the user. The customer is a water purification technology service company focused on the research, development, production, and sales of water treatment agents. They have high requirements for production process quality and, consequently, high standards for the belt-type quantitative weighing feeder used for transportation, weighing, and ingredient dispensing.

The material conveyed on the customer's site is ferrous sulfate, which has certain acidity and alkalinity. Therefore, the feeder's belt and body material must be acid and alkali resistant. The distance from the discharge port to the outlet center is 6 meters, with a feeding capacity of up to 24 tons per hour. Originally, the customer intended to install a belt scale using existing equipment on-site. However, after analyzing and proposing a solution by Guonuo Technology's pre-sales support, it was determined that the belt scale, constrained by the on-site environment and conditions, could not achieve the customer's desired measurement accuracy and stability. Additionally, it would require an additional control system, increasing the cost. After multiple comparisons, considering the achievable application effects and cost-effectiveness, the customer ultimately chose Guonuo's belt-type quantitative weighing feeder.

Due to the specificity of the conveyed material, the belt of the Guonuo belt feeder adopts an acid and alkali-resistant conveyor belt, and the feeder body is made of stainless steel with corrosion and acid-alkali resistance, ensuring durability and a long service life, and avoiding feeder damage caused by material corrosion.

Given the large feeding volume at the customer's production site, the feeder uses a wide conveyor belt and a high-capacity weighing sensor, suitable for on-site high-volume production. During material transportation, the high flow rate can easily cause material spillage. Therefore, the feeder is equipped with baffles to prevent material spillage.

The Guonuo belt-type quantitative weighing feeder uses digital weighing sensors, which offer higher sensitivity and stronger signal anti-interference capabilities. The weighing signals received by the feeder's instrument more accurately reflect the actual material flow rate. The speed sensor accurately reflects the belt speed, resulting in higher measurement accuracy. The variable frequency feeder compares the set parameter values in real-time to accurately control the feeding, meeting the customer's required accuracy and improving the quality of water treatment agents.

The feeder is equipped with a control cabinet for querying on-site data and setting feeder and production ingredient-related parameters, making the operation simple and convenient. Managers can remotely monitor the feeder's real-time operating status, production real-time data, and set relevant parameters through the upper computer software system. They can also query historical data and reports.

Guonuo Technology's belt-type quantitative weighing feeder is customized according to the user's on-site material characteristics and production conditions, meeting user needs and adapting to the on-site environment. It features high-quality components, stable and reliable performance, and provides a software system with strong management capabilities.